四环福瑞科仪科技发展(北京)有限公司
崩解温度又名崩解点,所谓崩解温度是对已经干燥的产品而言的。冻干机在升华干燥阶段,随着升华时间的增长,产品中会出现已干层和冻结层,这两层之间的交界面是升华面,随着升华的进行,升华界面不断向减小冻结层方向移动,干燥层厚度逐渐增加。已干燥的产品应该是疏松多乱,保持一个稳定的状态,以便下层冻结产品中升华的水蒸汽顺利通过,使全部的产品都良好的干燥。
但某些已干燥的产品当温度达到某一数值时会失去刚性,发生类似崩溃的现象,失去了疏松多孔的性质,使干燥产品有些发粘。比重增加,颜色加深。发生这种变化的温度就叫做崩解温度。
对于这样的产品要获得良好的干燥,只有保持升华中的干燥产品的温度在崩解点以下,直到冻结产品全部升华完毕为止,才能使产品温度继续上升。这时由于产品中已不存在冻结冰,干燥产品即使发生崩解也不会影响产品的干燥,因为产品已从升华阶段转入解吸干燥阶段。
没有发生崩解的干燥产品与发生崩解的干燥产品在外观上用肉眼看不出有什么差别,只有在显微镜下才能看到结构上的变化。当在显微镜下观察产品的冷冻干燥过程时,如果看到发生崩解现象,那么这时的温度就是该产品的崩解温度。
有些产品的崩解温度高于共熔点温度,那么升华时仅需控制产品温度低于共熔点温度就行了;但有些产品的崩解温度低于共熔点温度,那么按照一般的方法控制升华时就可能发生崩解现象,这样的产品只有在较低的温度下进行升华,因此必须延长冻干时间。
干燥产品发生崩解之后,阻碍或影响下层冻结产品升华的水蒸汽的通过,于是升华速度减慢冻结产品吸收热量减少,由板层继续供给的热量就有多余。将会造成冻结产品温度上升,产品发生熔化发泡现象。
崩解温度与产品的种类和性质有关,因此应该合理的选择产品的保护剂,使崩解温度尽可能高一些,例如产品的崩解温度应高于该产品的共熔点温度。
崩解温度一般由试验来确定,通过显微冷冻干燥试验可以观察到崩解现象,从而确定崩解温度。
产品的崩解温度取决于产品本身的品种和保护剂的种类;混合物质的崩解温度取决于各组分的崩解温度。因此在选择产品的冻干保护剂时,应选择具有较高崩解温度的材料,使升华干燥能在不很低的温度下进行,以节省冻干的能耗和时间,提高生产率。
通过对崩解点温度进行测量,显示崩解点温度与冻干机性能有密切联系。冻干机预冻过程中预冻速度及传热系数等决定了产品冰架结构,从而决定了产品的崩解点温度。不同预冻速度下,产品的崩解点温度较大差异。
甘氨酸、甘露醇、葡聚糖、木糖醇、聚已烯吡咯烷酮和蛋白质混合物等保护剂能提高产品的崩解温度。
NAME | COMPONENT | DURATION | 0 ms | 10 ms | 20 ms | 30 ms | 40 ms | 50 ms |
---|---|---|---|---|---|---|---|---|
Bootstrap | Timer | 15.16 ms | ||||||
Routing | Timer | 0.04 ms | ||||||
Controller | Timer | 42.16 ms | ||||||
Controller Constructor | Timer | 13.63 ms | ||||||
Query | Database | 0.49 ms | ||||||
Query | Database | 0.61 ms | ||||||
Query | Database | 0.30 ms | ||||||
Query | Database | 0.26 ms | ||||||
Query | Database | 0.59 ms | ||||||
Query | Database | 0.29 ms |
Time | Query String |
---|---|
0.49 ms | SELECT * FROM `bjpc_1_share_index` WHERE `id` = 109 |
0.61 ms | SELECT * FROM `bjpc_1_article` WHERE `id` = 109 |
0.3 ms | SELECT * FROM `bjpc_1_article_data_0` WHERE `id` = 109 |
0.26 ms | SELECT * FROM `bjpc_1_article_category_data` WHERE `id` = 109 |
0.59 ms | SELECT * FROM `bjpc_1_article` WHERE `catid` = 14 AND `status` = 9 AND `id` < 109 ORDER BY `id` desc LIMIT 1 |
0.29 ms | SELECT * FROM `bjpc_1_article` WHERE `catid` = 14 AND `status` = 9 AND `id` > 109 ORDER BY `id` asc LIMIT 1 |
模板 | 路径 |
---|---|
news_article.html | /www/wwwroot/www.bjshky.com.cn/template/pc/bjshky/home/news_article.html |
link.html | /www/wwwroot/www.bjshky.com.cn/template/pc/bjshky/home/link.html |
head.html | /www/wwwroot/www.bjshky.com.cn/template/pc/bjshky/home/head.html |
foot.html | /www/wwwroot/www.bjshky.com.cn/template/pc/bjshky/home/foot.html |
模板 | 提示 |
---|---|
news_article.html | 由于模板文件[/www/wwwroot/www.bjshky.com.cn/template/pc/bjshky/home/article/news_article.html]不存在,因此本页面引用主目录的模板[/www/wwwroot/www.bjshky.com.cn/template/pc/bjshky/home/news_article.html] |
link.html | 由于模板文件[/www/wwwroot/www.bjshky.com.cn/template/pc/bjshky/home/article/link.html]不存在,因此本页面引用主目录的模板[/www/wwwroot/www.bjshky.com.cn/template/pc/bjshky/home/link.html] |
head.html | 由于模板文件[/www/wwwroot/www.bjshky.com.cn/template/pc/bjshky/home/article/head.html]不存在,因此本页面引用主目录的模板[/www/wwwroot/www.bjshky.com.cn/template/pc/bjshky/home/head.html] |
foot.html | 由于模板文件[/www/wwwroot/www.bjshky.com.cn/template/pc/bjshky/home/article/foot.html]不存在,因此本页面引用主目录的模板[/www/wwwroot/www.bjshky.com.cn/template/pc/bjshky/home/foot.html] |
id | '109' |
catid | '14' |
title | '冻干产品的崩解温度' |
thumb | '' |
keywords | '冻干,产品,的,崩解,温度,四环,福瑞科,仪,' |
description | '四环福瑞科仪科技发展(北京)有限公司 崩解温度又名崩解点,所谓崩解温度是对已经干燥的产品而言的。冻干机在升华干燥阶段,随着升华时间的增长,产品中会出现已干层和冻结层,这两层之间的交界面是升华面,随着升华的进行,升华界面不断向减小冻结层方向移动,干燥层厚度逐渐增加。已干燥的产品应该是疏松多乱,保持一个稳定的状态,以便下层冻结产品中升华的水蒸汽顺利通过,使全部的产品都良好的干燥。 但某些已干燥的产品当温度达到某一数值时会失去刚性,发生类似崩溃的现象,失去了疏松多孔的性质,使干燥产品有些发粘。比重增加,颜色加深' |
hits | '144' |
uid | '1' |
author | '未知' |
status | '9' |
url | '/index.php?c=show&id=109' |
link_id | '0' |
tableid | '0' |
inputip | '' |
inputtime | '2020-04-03 09:24:16' |
updatetime | '2020-04-03 16:58:00' |
displayorder | '107' |
filename | '' |
shorttitle | '' |
myflag | array ( 0 => 'c', ) |
content | '<p style="text-indent:32px;text-autospace:ideograph-numeric;line-height:150%"><span style=";font-family:宋体;line-height:150%;font-size:16px"><span style="font-family:宋体"><img src="/uploads/allimg/20200403/1585876984206216.jpg" title="1585876984206216.jpg" alt="标识.jpg"/></span></span><span style="font-family: 仿宋; letter-spacing: 0px;">四环福瑞科仪科技发展(北京)有限公司</span></p><p style="text-indent:32px;text-autospace:ideograph-numeric;line-height:150%"><span style="font-family: 仿宋;line-height: 150%;letter-spacing: 0;font-size: 16px"><span style="font-family:仿宋"><br/></span></span></p><p style="text-indent:32px;text-autospace:ideograph-numeric;line-height:150%"><span style=";font-family:宋体;line-height:150%;font-size:16px"><span style="font-family:宋体">崩解温度又名崩解点,所谓崩解温度是对已经干燥的产品而言的。冻干机在升华干燥阶段,随着升华时间的增长,产品中会出现已干层和冻结层,这两层之间的交界面是升华面,随着升华的进行,升华界面不断向减小冻结层方向移动,干燥层厚度逐渐增加。已干燥的产品应该是疏松多乱,保持一个稳定的状态,以便下层冻结产品中升华的水蒸汽顺利通过,使全部的产品都良好的干燥。</span></span></p><p style="text-indent:32px;text-autospace:ideograph-numeric;line-height:150%"><span style=";font-family:宋体;line-height:150%;font-size:16px"><span style="font-family:宋体">但某些已干燥的产品当温度达到某一数值时会失去刚性,发生类似崩溃的现象,失去了疏松多孔的性质,使干燥产品有些发粘。比重增加,颜色加深。发生这种变化的温度就叫做崩解温度。</span></span></p><p style="text-indent:32px;text-autospace:ideograph-numeric;line-height:150%"><span style=";font-family:宋体;line-height:150%;font-size:16px"><span style="font-family:宋体">对于这样的产品要获得良好的干燥,只有保持升华中的干燥产品的温度在崩解点以下,直到冻结产品全部升华完毕为止,才能使产品温度继续上升。这时由于产品中已不存在冻结冰,干燥产品即使发生崩解也不会影响产品的干燥,因为产品已从升华阶段转入解吸干燥阶段。</span></span></p><p style="text-indent:32px;text-autospace:ideograph-numeric;line-height:150%"><span style=";font-family:宋体;line-height:150%;font-size:16px"><span style="font-family:宋体">没有发生崩解的干燥产品与发生崩解的干燥产品在外观上用肉眼看不出有什么差别,只有在显微镜下才能看到结构上的变化。当在显微镜下观察产品的冷冻干燥过程时,如果看到发生崩解现象,那么这时的温度就是该产品的崩解温度。</span></span></p><p style="text-indent:32px;text-autospace:ideograph-numeric;line-height:150%"><span style=";font-family:宋体;line-height:150%;font-size:16px"><span style="font-family:宋体">有些产品的崩解温度高于共熔点温度,那么升华时仅需控制产品温度低于共熔点温度就行了;但有些产品的崩解温度低于共熔点温度,那么按照一般的方法控制升华时就可能发生崩解现象,这样的产品只有在较低的温度下进行升华,因此必须延长冻干时间。</span></span></p><p style="text-indent:32px;text-autospace:ideograph-numeric;line-height:150%"><span style=";font-family:宋体;line-height:150%;font-size:16px"><span style="font-family:宋体">干燥产品发生崩解之后,阻碍或影响下层冻结产品升华的水蒸汽的通过,于是升华速度减慢冻结产品吸收热量减少,由板层继续供给的热量就有多余。将会造成冻结产品温度上升,产品发生熔化发泡现象。</span></span></p><p style="text-indent:32px;text-autospace:ideograph-numeric;line-height:150%"><span style=";font-family:宋体;line-height:150%;font-size:16px"><span style="font-family:宋体">崩解温度与产品的种类和性质有关,因此应该合理的选择产品的保护剂,使崩解温度尽可能高一些,例如产品的崩解温度应高于该产品的共熔点温度。</span></span></p><p style="text-indent:32px;text-autospace:ideograph-numeric;line-height:150%"><span style=";font-family:宋体;line-height:150%;font-size:16px"><span style="font-family:宋体">崩解温度一般由试验来确定,通过显微冷冻干燥试验可以观察到崩解现象,从而确定崩解温度。</span></span></p><p style="text-indent:32px;text-autospace:ideograph-numeric;line-height:150%"><span style=";font-family:宋体;line-height:150%;font-size:16px"><span style="font-family:宋体">产品的崩解温度取决于产品本身的品种和保护剂的种类;混合物质的崩解温度取决于各组分的崩解温度。因此在选择产品的冻干保护剂时,应选择具有较高崩解温度的材料,使升华干燥能在不很低的温度下进行,以节省冻干的能耗和时间,提高生产率。</span></span></p><p style="text-indent:32px;text-autospace:ideograph-numeric;line-height:150%"><span style=";font-family:宋体;line-height:150%;font-size:16px"><span style="font-family:宋体">通过对</span></span><span style=";font-family:宋体;line-height:150%;font-size:16px"><span style="font-family:宋体">崩解点温度进行测量,</span></span><span style=";font-family:宋体;line-height:150%;font-size:16px"><span style="font-family:宋体">显示</span></span><span style=";font-family:宋体;line-height:150%;font-size:16px"><span style="font-family:宋体">崩解点温度与冻干机性能有密切联系。冻干机预冻过程中预冻速度及传热系数等决定了产品冰架结构,从而决定了产品的崩解点温度。不同预冻速度下,产品的崩解点温度较大差异。</span> </span></p><p style="text-indent:32px;text-autospace:ideograph-numeric;line-height:150%"><span style=";font-family:宋体;line-height:150%;font-size:16px"><span style="font-family:宋体">甘氨酸、甘露醇、葡聚糖、木糖醇、聚已烯吡咯烷酮和蛋白质混合物等保护剂能提高产品的崩解温度。</span></span></p><p><br/></p>' |
tag | '冻干,产品,的,崩解,温度,四环,福瑞科,仪,' |
kws | array ( '冻干' => 'http://www.bjshky.com.cn/index.php?s=article&c=search&keyword=%E5%86%BB%E5%B9%B2', '产品' => 'http://www.bjshky.com.cn/index.php?s=article&c=search&keyword=%E4%BA%A7%E5%93%81', '的' => 'http://www.bjshky.com.cn/index.php?s=article&c=search&keyword=%E7%9A%84', '崩解' => 'http://www.bjshky.com.cn/index.php?s=article&c=search&keyword=%E5%B4%A9%E8%A7%A3', '温度' => 'http://www.bjshky.com.cn/index.php?s=article&c=search&keyword=%E6%B8%A9%E5%BA%A6', '四环' => 'http://www.bjshky.com.cn/index.php?s=article&c=search&keyword=%E5%9B%9B%E7%8E%AF', '福瑞科' => 'http://www.bjshky.com.cn/index.php?s=article&c=search&keyword=%E7%A6%8F%E7%91%9E%E7%A7%91', '仪' => 'http://www.bjshky.com.cn/index.php?s=article&c=search&keyword=%E4%BB%AA', ) |
tags | array ( ) |
prev_page | array ( 'id' => '108', 'catid' => '14', 'title' => '冷冻干燥机真空泵油的性能要求', 'thumb' => '/uploads/allimg/20200320/1584681298757558-lp.jpg', 'keywords' => '冷冻,干燥机,冻,真空泵,油,的,性能,要求,北京,', 'description' => '北京四环福瑞科仪科技发展(北京)有限公司 冷冻干燥机冻真空泵油的性能要求 一 、 真空泵油的密封性 真空泵油需要具有适宜的粘度,在低温下能使真空泵迅速启动,在高温下真空泵油能具有良好的密封性,在泵内真空泵油具有较低的温升。不含有轻质的易挥发组分,降低使用过程中真空泵的返油率。 二、真空泵油的饱和蒸汽压 饱和蒸汽压是真空泵油较关键的指标之一。在恒温的密闭容器中,当汽液两相达到动态平衡时的压力称谓饱和蒸汽压。 油品的饱和蒸汽压要尽量低,在泵的最高工作温度下,仍要具有足够低的饱和蒸汽压,并要低于真空泵规定的极限', 'hits' => '167', 'uid' => '1', 'author' => '未知', 'status' => '9', 'url' => 'http://www.bjshky.com.cn/index.php?c=show&id=108', 'link_id' => '0', 'tableid' => '0', 'inputip' => '', 'inputtime' => '1584682176', 'updatetime' => '1586508987', 'displayorder' => '106', 'filename' => '', 'shorttitle' => '', 'myflag' => '["c","p"]', ) |
next_page | array ( 'id' => '112', 'catid' => '14', 'title' => '北京四环福瑞:冷冻干燥机的优势', 'thumb' => '/uploads/allimg/20200410/1586507811888629-lp.jpg', 'keywords' => '四环福瑞,四环冻干,冷冻干燥机', 'description' => '今天四环福瑞来为大家说一说干燥,干燥的方法多种多样,比如烘干、晒干、喷雾干燥、煮干以及真空干燥等,普通的干燥方法通常都要在0℃以上或更高的温度下进行。并且干燥所得的产品一般都会存在体积缩小、质地变硬的问题,其中易挥发的成分大部分都会损失掉,一些热敏性的物质还会发生变性、失活,有些物质甚至会发生氧化。因此,干燥后的产品与干燥前相比,在性状上有很大的差别。 ', 'hits' => '62', 'uid' => '1', 'author' => '未知', 'status' => '9', 'url' => 'http://www.bjshky.com.cn/index.php?c=show&id=112', 'link_id' => '0', 'tableid' => '0', 'inputip' => '', 'inputtime' => '1586507738', 'updatetime' => '1586508979', 'displayorder' => '110', 'filename' => '', 'shorttitle' => '', 'myflag' => '["c"]', ) |
_inputtime | '1585877056' |
_updatetime | '1585904280' |
_myflag | '["c"]' |
meta_title | '冻干产品的崩解温度_四环资讯_新闻动态_冻干机-北京四环冻干-真空冷冻干燥机-四环冻干机官网-实验室冻干机-化妆品冻干机' |
meta_keywords | '冻干,产品,的,崩解,温度,四环,福瑞科,仪' |
meta_description | '四环福瑞科仪科技发展(北京)有限公司 崩解温度又名崩解点,所谓崩解温度是对已经干燥的产品而言的。冻干机在升华干燥阶段,随着升华时间的增长,产品中会出现已干层和冻结层,这两层之间的交界面是升华面,随着升华的进行,升华界面不断向减小冻结层方向移动,干燥层厚度逐渐增加。已干燥的产品应该是疏松多乱,保持一个稳定的状态,以便下层冻结产品中升华的水蒸汽顺利通过,使全部的产品都良好的干燥。 但某些已干燥的产品当温度达到某一数值时会失去刚性,发生类似崩溃的现象,失去了疏松多孔的性质,使干燥产品有些发粘。比重增加,颜色加深' |
cat | array ( 'id' => '14', 'tid' => '1', 'pid' => '5', 'mid' => 'article', 'pids' => '0,5', 'name' => '四环资讯', 'dirname' => 'news', 'pdirname' => 'news/', 'child' => 0, 'childids' => 14, 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => '', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 0, 'seo' => array ( 'list_title' => '四环科仪|冷干机品牌|冷冻干燥机', 'list_keywords' => '四环科仪,冷干机品牌,冷冻干燥机,北京四环冻干机', 'list_description' => '北京四环科仪是一家专业冷干机品牌企业,专业生产用于药品冻干,检测冻干,食品冻干,土壤冻干等各种冻干工作的LGJ北京四环冻干机,是一家大型的冷冻干燥机制造企业,欢迎咨询4000082009', ), 'template' => array ( 'pagesize' => '12', 'mpagesize' => '10', 'page' => 'page.html', 'list' => 'news.html', 'category' => 'news.html', 'search' => 'search.html', 'show' => 'news_article.html', ), 'cat_field' => '', 'module_field' => '', 'html' => 0, ), 'displayorder' => '0', 'pcatpost' => 0, 'topid' => '5', 'catids' => array ( 0 => '14', ), 'is_post' => 1, 'url' => '/index.php?c=category&id=14', 'total' => '-', 'field' => array ( ), ) |
top | array ( 'id' => '5', 'tid' => '1', 'pid' => '0', 'mid' => 'article', 'pids' => '0', 'name' => '新闻动态', 'dirname' => 'news', 'pdirname' => '', 'child' => 1, 'childids' => '5,14,15', 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => '', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 0, 'seo' => array ( 'list_title' => '北京四环冻干机-冻干机品牌-冷干机厂家-冷干机-冷干机品牌', 'list_keywords' => '北京四环冻干机,冻干机品牌,冷干机厂家,真空冷冻干燥机,冷干机,冷干机品牌', 'list_description' => '北京四环福瑞科仪是一家专业冷干机厂家,作为国内的大型冻干机品牌,生产用于包括药品冻干,检测冻干,食品冻干,土壤冻干等LGJ真空冷冻干燥机,质量优越的北京四环冻干机受到了众多客户的一致好评,欢迎咨询4000082009', ), 'template' => array ( 'pagesize' => '12', 'mpagesize' => '10', 'page' => 'page.html', 'list' => 'news.html', 'category' => 'news.html', 'search' => 'search.html', 'show' => 'news_article.html', ), 'cat_field' => '', 'module_field' => '', 'html' => 0, ), 'displayorder' => '0', 'pcatpost' => 0, 'topid' => '5', 'catids' => array ( 0 => '5', 1 => '14', 2 => '15', ), 'is_post' => 0, 'url' => '/index.php?c=category&id=5', 'total' => '-', 'field' => array ( ), ) |
pageid | 1 |
params | array ( 'catid' => '14', ) |
parent | array ( 'id' => '5', 'tid' => '1', 'pid' => '0', 'mid' => 'article', 'pids' => '0', 'name' => '新闻动态', 'dirname' => 'news', 'pdirname' => '', 'child' => 1, 'childids' => '5,14,15', 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => '', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 0, 'seo' => array ( 'list_title' => '北京四环冻干机-冻干机品牌-冷干机厂家-冷干机-冷干机品牌', 'list_keywords' => '北京四环冻干机,冻干机品牌,冷干机厂家,真空冷冻干燥机,冷干机,冷干机品牌', 'list_description' => '北京四环福瑞科仪是一家专业冷干机厂家,作为国内的大型冻干机品牌,生产用于包括药品冻干,检测冻干,食品冻干,土壤冻干等LGJ真空冷冻干燥机,质量优越的北京四环冻干机受到了众多客户的一致好评,欢迎咨询4000082009', ), 'template' => array ( 'pagesize' => '12', 'mpagesize' => '10', 'page' => 'page.html', 'list' => 'news.html', 'category' => 'news.html', 'search' => 'search.html', 'show' => 'news_article.html', ), 'cat_field' => '', 'module_field' => '', 'html' => 0, ), 'displayorder' => '0', 'pcatpost' => 0, 'topid' => '5', 'catids' => array ( 0 => '5', 1 => '14', 2 => '15', ), 'is_post' => 0, 'url' => 'http://www.bjshky.com.cn/index.php?c=category&id=5', 'total' => '-', 'field' => array ( ), ) |
markid | 'module-article-14' |
related | array ( 14 => array ( 'id' => '14', 'tid' => '1', 'pid' => '5', 'mid' => 'article', 'pids' => '0,5', 'name' => '四环资讯', 'dirname' => 'news', 'pdirname' => 'news/', 'child' => 0, 'childids' => 14, 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => '', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 0, 'seo' => array ( 'list_title' => '四环科仪|冷干机品牌|冷冻干燥机', 'list_keywords' => '四环科仪,冷干机品牌,冷冻干燥机,北京四环冻干机', 'list_description' => '北京四环科仪是一家专业冷干机品牌企业,专业生产用于药品冻干,检测冻干,食品冻干,土壤冻干等各种冻干工作的LGJ北京四环冻干机,是一家大型的冷冻干燥机制造企业,欢迎咨询4000082009', ), 'template' => array ( 'pagesize' => '12', 'mpagesize' => '10', 'page' => 'page.html', 'list' => 'news.html', 'category' => 'news.html', 'search' => 'search.html', 'show' => 'news_article.html', ), 'cat_field' => '', 'module_field' => '', 'html' => 0, ), 'displayorder' => '0', 'pcatpost' => 0, 'topid' => '5', 'catids' => array ( 0 => '14', ), 'is_post' => 1, 'url' => 'http://www.bjshky.com.cn/index.php?c=category&id=14', 'total' => '-', 'field' => array ( ), ), 15 => array ( 'id' => '15', 'tid' => '1', 'pid' => '5', 'mid' => 'article', 'pids' => '0,5', 'name' => '行业资讯', 'dirname' => 'hyzx', 'pdirname' => 'news/', 'child' => 0, 'childids' => 15, 'domain' => '', 'mobile_domain' => '', 'thumb' => '', 'show' => '1', 'content' => '', 'setting' => array ( 'disabled' => '0', 'linkurl' => '', 'urlrule' => 0, 'seo' => array ( 'list_title' => '冻干机品牌|冷干机厂家|真空冷冻干燥机', 'list_keywords' => '冻干机品牌,冷干机厂家,真空冷冻干燥机,冷冻干燥机操作', 'list_description' => '北京四环福瑞科仪是一家国内大型冷干机厂家,作为专业冻干机品牌,提供用于药品冻干,检测冻干,食品冻干,土壤冻干等各种冻干工作的真空冷冻干燥机,同时还提供详尽的冷冻干燥机操作及使用说明,欢迎咨询4000082009', ), 'template' => array ( 'pagesize' => '12', 'mpagesize' => '10', 'page' => 'page.html', 'list' => 'news.html', 'category' => 'news.html', 'search' => 'search.html', 'show' => 'news_article.html', ), 'cat_field' => '', 'module_field' => '', 'html' => 0, ), 'displayorder' => '0', 'pcatpost' => 0, 'topid' => '5', 'catids' => array ( 0 => '15', ), 'is_post' => 1, 'url' => 'http://www.bjshky.com.cn/index.php?c=category&id=15', 'total' => '-', 'field' => array ( ), ), ) |
urlrule | '/index.php?c=show&id=109&page=[page]' |
fix_html_now_url | '' |
my_web_url | 'http://www.bjshky.com.cn/index.php?c=show&id=109' |
get | array ( 'c' => 'show', 'id' => '109', ) |
App.php | APPPATH/Config/App.php |
Auto.php | FCPATH/App/Form/Config/Auto.php |
Autoload.php | APPPATH/Config/Autoload.php |
Cache.php | APPPATH/Config/Cache.php |
Cache.php | APPPATH/Library/Cache.php |
Checkbox.php | APPPATH/Field/Checkbox.php |
CodeIgniter.php | APPPATH/Extend/CodeIgniter.php |
Constants.php | APPPATH/Config/Constants.php |
Content.php | APPPATH/Model/Content.php |
ContentSecurityPolicy.php | APPPATH/Config/ContentSecurityPolicy.php |
Cookie.php | APPPATH/Config/Cookie.php |
Database.php | APPPATH/Config/Database.php |
Date.php | APPPATH/Field/Date.php |
Exceptions.php | APPPATH/Config/Exceptions.php |
Exceptions.php | APPPATH/Extend/Exceptions.php |
Field.php | APPPATH/Library/Field.php |
File.php | APPPATH/Field/File.php |
Filters.php | APPPATH/Config/Filters.php |
Helper.php | APPPATH/Core/Helper.php |
Hooks.php | APPPATH/Core/Hooks.php |
Init.php | APPPATH/Init.php |
Input.php | APPPATH/Library/Input.php |
Kint.php | APPPATH/Config/Kint.php |
Lang.php | APPPATH/Library/Lang.php |
Logger.php | APPPATH/Config/Logger.php |
Member.php | APPPATH/Model/Member.php |
Model.php | APPPATH/Core/Model.php |
Module.php | APPPATH/Extend/Home/Module.php |
Modules.php | APPPATH/Config/Modules.php |
Paths.php | APPPATH/Config/Paths.php |
Phpcmf.php | APPPATH/Core/Phpcmf.php |
Request.php | APPPATH/Extend/Request.php |
Router.php | APPPATH/Library/Router.php |
Routes.php | APPPATH/Config/Routes.php |
Security.php | APPPATH/Library/Security.php |
Seo.php | APPPATH/Library/Seo.php |
Service.php | APPPATH/Core/Service.php |
Services.php | APPPATH/Config/Services.php |
Show.php | APPPATH/Control/Show.php |
Text.php | APPPATH/Field/Text.php |
Textarea.php | APPPATH/Field/Textarea.php |
Toolbar.php | APPPATH/Config/Toolbar.php |
Ueditor.php | APPPATH/Field/Ueditor.php |
UserAgents.php | APPPATH/Config/UserAgents.php |
Version.php | FCPATH/My/Config/Version.php |
View.php | APPPATH/Config/View.php |
View.php | APPPATH/Core/View.php |
View.php | APPPATH/Extend/View.php |
custom.php | /www/wwwroot/www.bjshky.com.cn/config/custom.php |
database.php | /www/wwwroot/www.bjshky.com.cn/config/database.php |
domain_app.php | /www/wwwroot/www.bjshky.com.cn/cache/config/domain_app.php |
domain_client.php | /www/wwwroot/www.bjshky.com.cn/cache/config/domain_client.php |
hooks.php | /www/wwwroot/www.bjshky.com.cn/config/hooks.php |
index.php | /www/wwwroot/www.bjshky.com.cn/index.php |
lang.php | /www/wwwroot/www.bjshky.com.cn/api/language/zh-cn/lang.php |
site.php | /www/wwwroot/www.bjshky.com.cn/cache/config/site.php |
template_pc_bjshky_home_foot.html.cache.php | /www/wwwroot/www.bjshky.com.cn/cache/template/template_pc_bjshky_home_foot.html.cache.php |
template_pc_bjshky_home_head.html.cache.php | /www/wwwroot/www.bjshky.com.cn/cache/template/template_pc_bjshky_home_head.html.cache.php |
template_pc_bjshky_home_link.html.cache.php | /www/wwwroot/www.bjshky.com.cn/cache/template/template_pc_bjshky_home_link.html.cache.php |
template_pc_bjshky_home_news_article.html.cache.php | /www/wwwroot/www.bjshky.com.cn/cache/template/template_pc_bjshky_home_news_article.html.cache.php |
AutoloadConfig.php | SYSTEMPATH/Config/AutoloadConfig.php |
Autoloader.php | SYSTEMPATH/Autoloader/Autoloader.php |
BaseBuilder.php | SYSTEMPATH/Database/BaseBuilder.php |
BaseCollector.php | SYSTEMPATH/Debug/Toolbar/Collectors/BaseCollector.php |
BaseConfig.php | SYSTEMPATH/Config/BaseConfig.php |
BaseConnection.php | SYSTEMPATH/Database/BaseConnection.php |
BaseHandler.php | SYSTEMPATH/Cache/Handlers/BaseHandler.php |
BaseResult.php | SYSTEMPATH/Database/BaseResult.php |
BaseService.php | SYSTEMPATH/Config/BaseService.php |
Builder.php | SYSTEMPATH/Database/MySQLi/Builder.php |
CacheFactory.php | SYSTEMPATH/Cache/CacheFactory.php |
CacheInterface.php | SYSTEMPATH/Cache/CacheInterface.php |
CliRenderer.php | SYSTEMPATH/ThirdParty/Kint/Renderer/CliRenderer.php |
CloneableCookieInterface.php | SYSTEMPATH/Cookie/CloneableCookieInterface.php |
CodeIgniter.php | SYSTEMPATH/CodeIgniter.php |
Common.php | SYSTEMPATH/Common.php |
Config.php | SYSTEMPATH/Config/Config.php |
Config.php | SYSTEMPATH/Database/Config.php |
Connection.php | SYSTEMPATH/Database/MySQLi/Connection.php |
ConnectionInterface.php | SYSTEMPATH/Database/ConnectionInterface.php |
ContentSecurityPolicy.php | SYSTEMPATH/HTTP/ContentSecurityPolicy.php |
Controller.php | SYSTEMPATH/Controller.php |
Cookie.php | SYSTEMPATH/Cookie/Cookie.php |
CookieInterface.php | SYSTEMPATH/Cookie/CookieInterface.php |
CookieStore.php | SYSTEMPATH/Cookie/CookieStore.php |
Database.php | SYSTEMPATH/Database/Database.php |
Database.php | SYSTEMPATH/Debug/Toolbar/Collectors/Database.php |
DebugToolbar.php | SYSTEMPATH/Filters/DebugToolbar.php |
DotEnv.php | SYSTEMPATH/Config/DotEnv.php |
Escaper.php | SYSTEMPATH/ThirdParty/Escaper/Escaper.php |
Events.php | SYSTEMPATH/Debug/Toolbar/Collectors/Events.php |
Events.php | SYSTEMPATH/Events/Events.php |
Exceptions.php | SYSTEMPATH/Debug/Exceptions.php |
Factories.php | SYSTEMPATH/Config/Factories.php |
Factory.php | SYSTEMPATH/Config/Factory.php |
FileHandler.php | SYSTEMPATH/Cache/Handlers/FileHandler.php |
FileLocator.php | SYSTEMPATH/Autoloader/FileLocator.php |
Files.php | SYSTEMPATH/Debug/Toolbar/Collectors/Files.php |
FilterInterface.php | SYSTEMPATH/Filters/FilterInterface.php |
Filters.php | SYSTEMPATH/Filters/Filters.php |
Header.php | SYSTEMPATH/HTTP/Header.php |
IncomingRequest.php | SYSTEMPATH/HTTP/IncomingRequest.php |
Kint.php | SYSTEMPATH/ThirdParty/Kint/Kint.php |
Logger.php | SYSTEMPATH/Log/Logger.php |
LoggerInterface.php | SYSTEMPATH/ThirdParty/PSR/Log/LoggerInterface.php |
Logs.php | SYSTEMPATH/Debug/Toolbar/Collectors/Logs.php |
Message.php | SYSTEMPATH/HTTP/Message.php |
MessageInterface.php | SYSTEMPATH/HTTP/MessageInterface.php |
MessageTrait.php | SYSTEMPATH/HTTP/MessageTrait.php |
Modules.php | SYSTEMPATH/Modules/Modules.php |
Query.php | SYSTEMPATH/Database/Query.php |
QueryInterface.php | SYSTEMPATH/Database/QueryInterface.php |
Renderer.php | SYSTEMPATH/ThirdParty/Kint/Renderer/Renderer.php |
RendererInterface.php | SYSTEMPATH/View/RendererInterface.php |
Request.php | SYSTEMPATH/HTTP/Request.php |
RequestInterface.php | SYSTEMPATH/HTTP/RequestInterface.php |
RequestTrait.php | SYSTEMPATH/HTTP/RequestTrait.php |
Response.php | SYSTEMPATH/HTTP/Response.php |
ResponseInterface.php | SYSTEMPATH/HTTP/ResponseInterface.php |
ResponseTrait.php | SYSTEMPATH/API/ResponseTrait.php |
ResponseTrait.php | SYSTEMPATH/HTTP/ResponseTrait.php |
Result.php | SYSTEMPATH/Database/MySQLi/Result.php |
ResultInterface.php | SYSTEMPATH/Database/ResultInterface.php |
RichRenderer.php | SYSTEMPATH/ThirdParty/Kint/Renderer/RichRenderer.php |
RouteCollection.php | SYSTEMPATH/Router/RouteCollection.php |
RouteCollectionInterface.php | SYSTEMPATH/Router/RouteCollectionInterface.php |
Router.php | SYSTEMPATH/Router/Router.php |
RouterInterface.php | SYSTEMPATH/Router/RouterInterface.php |
Routes.php | SYSTEMPATH/Config/Routes.php |
Routes.php | SYSTEMPATH/Debug/Toolbar/Collectors/Routes.php |
Services.php | SYSTEMPATH/Config/Services.php |
TextRenderer.php | SYSTEMPATH/ThirdParty/Kint/Renderer/TextRenderer.php |
Timer.php | SYSTEMPATH/Debug/Timer.php |
Timers.php | SYSTEMPATH/Debug/Toolbar/Collectors/Timers.php |
Toolbar.php | SYSTEMPATH/Debug/Toolbar.php |
URI.php | SYSTEMPATH/HTTP/URI.php |
UserAgent.php | SYSTEMPATH/HTTP/UserAgent.php |
Utils.php | SYSTEMPATH/ThirdParty/Kint/Utils.php |
View.php | SYSTEMPATH/Config/View.php |
View.php | SYSTEMPATH/View/View.php |
Views.php | SYSTEMPATH/Debug/Toolbar/Collectors/Views.php |
init.php | SYSTEMPATH/ThirdParty/Kint/init.php |
init_helpers.php | SYSTEMPATH/ThirdParty/Kint/init_helpers.php |
url_helper.php | SYSTEMPATH/Helpers/url_helper.php |
Directory: | |
Controller: | \Phpcmf\Control\Show |
Method: | index |
Params: | 0 / 0 |
Method | Route | Handler |
---|---|---|
GET | / | \Phpcmf\Control\Show::index |
HEAD | / | \Phpcmf\Control\Show::index |
POST | / | \Phpcmf\Control\Show::index |
PUT | / | \Phpcmf\Control\Show::index |
DELETE | / | \Phpcmf\Control\Show::index |
OPTIONS | / | \Phpcmf\Control\Show::index |
TRACE | / | \Phpcmf\Control\Show::index |
CONNECT | / | \Phpcmf\Control\Show::index |
CLI | migrations/([^/]+)/([^/]+) | \CodeIgniter\Commands\MigrationsCommand::$1/$2 |
CLI | migrations/([^/]+) | \CodeIgniter\Commands\MigrationsCommand::$1 |
CLI | migrations | \CodeIgniter\Commands\MigrationsCommand::index |
CLI | ci(.*) | \CodeIgniter\CLI\CommandRunner::index/$1 |
CLI | / | \Phpcmf\Control\Show::index |
Time | Event Name | Times Called |
---|---|---|
9.19 ms | pre_system | 1 |
0.06 ms | dbquery | 6 |
Action | Datetime | Status | Method | URL | Content-Type | Is AJAX? |
---|---|---|---|---|---|---|
2025-06-03 01:21:30 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 01:10:41 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 01:05:39 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 01:05:19 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 01:01:31 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 01:01:15 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 00:58:21 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 00:58:16 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 00:58:14 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 00:57:52 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 00:57:51 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 00:57:50 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 00:57:49 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 00:57:48 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 00:57:47 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 00:57:46 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 00:57:45 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 00:57:44 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 00:57:43 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No | |
2025-06-03 00:57:42 | 200 | GET | http://www.bjshky.com.cn/index.php/ | text/html; charset=UTF-8 | No |
Session doesn't seem to be active.
c | show |
id | 109 |
Accept-Encoding | gzip, deflate |
Accept | text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7 |
User-Agent | Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) |
Upgrade-Insecure-Requests | 1 |
Cache-Control | no-cache |
Pragma | no-cache |
Connection | keep-alive |
Host | www.bjshky.com.cn |
Accept-Encoding | gzip, deflate |
Accept | text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7 |
User-Agent | Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) |
Upgrade-Insecure-Requests | 1 |
Cache-Control | no-cache |
Pragma | no-cache |
Connection | keep-alive |
Host | www.bjshky.com.cn |
CodeIgniter Version: | 4.1.4 |
PHP Version: | 7.3.31 |
PHP SAPI: | fpm-fcgi |
Environment: | development |
Base URL: | http://www.bjshky.com.cn/ |
Timezone: | PRC |
Locale: | en |
Content Security Policy Enabled: | No |